SailNet Community - View Single Post - Schafer Roller Furling adjustment?
View Single Post
  #3  
Old 10-10-2003
bterrell3 bterrell3 is offline
Junior Member
 
Join Date: Aug 2002
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
bterrell3 is on a distinguished road
Schafer Roller Furling adjustment?

The Schaefer RF foil and drum sections go over a regular normal wire forestay. Normally, there would be a turnbuckle at the bottom of the forestay that connects to a tang on the lower end. To access the turnbuckle, it is necessary to loosen a set screw to allow the drum to slide up on the foil. Refer to the Schaefer manual for location of the set screw. Good luck.
Reply With Quote Share with Facebook