Hal,
If I could bother you for some assistance? Here's what I believe I'll need from Hamilton Marine:
- 1 ea, STRAINER INTAKE 1/2" IPS BRONZE 127070, Item #: PKO-493004PLB,
STRAINER INTAKE 1/2" IPS BRONZE 127070
- 1 ea, PIPE TO HOSE .50" FULL FL 90 DEG ELBOW 153308, Item #: GRO-FFC500
PIPE TO HOSE .50" FULL FL 90 DEG ELBOW 153308
- 3 ea, ADAPTER PIPE TO HOSE .50" STRAIGHT 116316, Item #: GRO-PTH-500
ADAPTER PIPE TO HOSE .50" STRAIGHT 116316
-or-
ADAPTER PIPE TO HOSE .50" PIPE TO 1/2" OR 5/8"HOSE 106047, Item #: CNN-65-007-56
ADAPTER PIPE TO HOSE .50" PIPE TO 1/2" OR 5/8"HOSE 106047
(3 of these because I might use a straight instead of the elbow in one spot.)
- 1 ea, HOSE CLAMP S/S 5/16"-7/8" 10/BOX 117663, Item #: HM-HC6206
HOSE CLAMP S/S 5/16"-7/8" 10/BOX 117663
These ought to be large enough to go around the hose, right?
(Wondering why one package of 10 SS hose clamps is less than 1/3 the price of another box on the same page?)
I only can't see what hose there is appropriate. There's "hose water heater" listed on
this page, but the smallest size is 5/8".
This is a lot easier when you can just walk into the store and snag various parts right off the shelves until you get a bunch that all actually fit together
.
Thanks,
Jim