SailNet Community - View Single Post - fresh water system stopped working after fill-up
View Single Post
Old 08-01-2008
tommyt tommyt is offline
Join Date: Sep 2002
Location: Michigan
Posts: 555
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
tommyt is on a distinguished road
Disconnect the water line just prior to the pump and see if gravity pushes water through it. Most tanks, when full, are above the pump so gravity allows the flow. If there is water there, then you have a pump issue. If not, probably a valve shut off somewhere. Usually water problems are more a matter of tracing the problem rather than a major issue. Just like electricity, it flows!
Reply With Quote Share with Facebook