SailNet Community - View Single Post - Cutlass Bearing
Thread: Cutlass Bearing
View Single Post
post #5 of Old 09-02-2008
fullkeel7
Senior Member
 
Join Date: Apr 2008
Location: Melbourne, Florida
Posts: 418
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 8
 
Rick and Kristen,

Decided against the Keys huh? I don't blame you with all the activity south.

Not sure of where on the waterway you are but if you're just west of La Belle, Joe at LaBelle Hatchee Marina says no haul out until you get to Ortona Lock. Glades Boat Works, according to Joe, will haul you out and says you can't miss it. They are a DIY marina or you can hire out the work.

Next stop before the lake would be Moore Haven but I haven't been there in years. If you're on the lake, Indiantown is about 20 miles east of the lake and is a full service facility. At last visit, you could DIY. It's a good place to hide out in a storm as well. Indiantown's number is 772-597-2455 and they said if you can get there before Thursday, there would be no problem on the haul out due to the weather they're expecting. That would be my choice if the Glades Boat Works does't work out.

Sorry, that's all the info I have, others more familiar may have better ideas. Good luck.....Bob
fullkeel7 is offline  
Quote Share with Facebook
 
 
For the best viewing experience please update your browser to Google Chrome