SailNet Community - View Single Post - biulding an icebox from scratch
View Single Post
  #1  
Old 09-17-2008
wolfenzee's Avatar
wolfenzee wolfenzee is offline
Senior Member
 
Join Date: Jul 2008
Location: S/V Waltzing Matilda, Port Ludlow, WA (NW Puget Sound)
Posts: 497
Thanks: 2
Thanked 2 Times in 1 Post
Rep Power: 7
wolfenzee is on a distinguished road
Send a message via ICQ to wolfenzee
biulding an icebox from scratch

I am building an icebox from scratch on my boat and could use advice on a few things. I have most of it figured out, type/thickness of insulation and general design. My main question is what is the best way to line it and the "plug" for the door, the actual out side of the door (top load) is a very thick/heavy 3" wood cutting board that extends to the sink. The actual food section is approx 12"x 18" x 16" deep(the block ice is up and behind the food, loaded from the deck). Any suggestions are welcome, I also plan to someday move out of the 19th century and put in some sort of thermo-electric system so am building it to be upgradeable
Reply With Quote Share with Facebook