Quote:
Originally Posted by SVDistantStar
Whats the best way to go about this if there is no little plate around the chainplates? All 3 of mine are in lined up with the mast and all go through a big hole cut in the deck. Its a crappy way to do it, but thats how it was done long before i got the boat. Ive got to figure out a way to reseal them one ive got the bulkhead replaced. You can see how they enter the deck in the picture. The hole is all goobered up with 5200.
 |
Bummer man...I think people should have to pass a test to buy 5200..
it is probably the most abused 3M product out there. OK stuff for the right application. Your probably gong to loose your gel coat trying to get that stuff off