|
Now I understand..
Now I understand why they have a 1000 PSI rating. It's not solely a Polysulfide but rather a Polysulfide/epoxy hybrid mix with added epoxy.
The added epoxy is clearly where it gets it's 1000 PSI rating from. I'd like to see some elongation before break numbers but they don't give the data on the site. Have you asked them about elongation before break numbers??
It does seem a little too permanent for bedding and with the epoxy I would not guess it can match the flexibility of a straight Polysulfide but you never know. 3M 101 is roughly 416% elongation before break..
__________________
______
-Maine Sail / CS-36T
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
© Images In Posts Property of Compass Marine Inc.
|