Join Date: Mar 2006
Location: New England
Thanked 18 Times in 14 Posts
Rep Power: 16
You could probably make the cradle using angle iron and 4"x4"s to create the cradle so that it can be easily disassembled.
You'll probably have to use some pipe in the construction of the cradle to put "boat stand" heads on to support the hulls and keep the boat balanced.
The real problem is keeping the pieces small enough to move and making the cradle light enough for you to move on your utility trailer. Steel angle iron heavy enough to make a cradle you can disassemble is going to be fairly heavy, probably a good deal heavier than a cradle that doesn't come apart.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
You know what the first rule of sailing is? ...Love. You can learn all the math in the 'verse, but you take
a boat to the sea you don't love, she'll shake you off just as sure as the turning of the worlds. Love keeps
her going when she oughta fall down, tells you she's hurting 'fore she keens. Makes her a home.
—Cpt. Mal Reynolds, Serenity (edited)
If you're new to the Sailnet Forums... please read this To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Still—DON'T READ THAT POST AGAIN.