That just means the areas the through-hulls were in were solid glass. There may be parts of the hull that are cored. It is very common on a cored hull to leave a solid laminate strip running down the center of the boat for the keel and through hulls.
I have a Dreadnought 32. I have closed up 5 thru hull openings. There is no Balsa Core in my vessel. ODAAT is cutter rigged and heavily built. Rick was in Nova Scotia last summer in ESKIMO on his third circumnavigation. I would trust my Dreadnought on any ocean.
Master, S/V ODAAT
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
You know what the first rule of sailing is? ...Love. You can learn all the math in the 'verse, but you take
a boat to the sea you don't love, she'll shake you off just as sure as the turning of the worlds. Love keeps
her going when she oughta fall down, tells you she's hurting 'fore she keens. Makes her a home.
—Cpt. Mal Reynolds, Serenity (edited)
If you're new to the Sailnet Forums... please read this To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Still—DON'T READ THAT POST AGAIN.