SailNet Community - View Single Post - Cutting out an Aluminum fuel tank.....
View Single Post
  #5  
Old 12-09-2008
GMarcus GMarcus is offline
Junior Member
 
Join Date: Aug 2008
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
GMarcus is on a distinguished road
Aircraft "nibbler"

Gerry:

You might try an aluminum "nibbler" usually used on aircraft/aircraft parts. It's strictly manual, but cheap but they also have air powered nibblers. It nibbles out about a .125" width kerf, but should work for what you intend doing..

Might look on Aircraft Spruce & Speciality's web site or Wag-Aero, etc.

Good luck,

Gary
Reply With Quote Share with Facebook