Depends on how much work you want to do and how complex the curvature of the interior surface is..
The nicest interiors I've seen have been made by epoxying furring strips to the interior and adding paneling over the furring strips. Of course, this only works on surfaces that are fairly simple in curvature. The advantage of doing this is that access panels for hardware can be made to simplify working on the hardware, and insulation can be added behind the panels to help keep the boat cooler in summer and warmer in winter.
__________________
Sailingdog
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Telstar 28
New England
You know what the first rule of sailing is? ...Love. You can learn all the math in the 'verse, but you take
a boat to the sea you don't love, she'll shake you off just as sure as the turning of the worlds. Love keeps
her going when she oughta fall down, tells you she's hurting 'fore she keens. Makes her a home.
—Cpt. Mal Reynolds, Serenity (edited)
If you're new to the Sailnet Forums... please read this
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts..
Still—DON'T READ THAT POST AGAIN.