SailNet Community - View Single Post - adhering teak to fiberglass
View Single Post
  #10  
Old 12-24-2008
justified justified is offline
Senior Member
 
Join Date: Jun 2007
Location: Old Saybrook
Posts: 303
Thanks: 1
Thanked 3 Times in 3 Posts
Rep Power: 8
justified is on a distinguished road
Saildog has the right ideas on the cedar or the white oak strips 1/2" should be the right thickness, will still bend nicely to the shape of the hull. If you glue/epoxy the teak you will need to clean the teak with acetone or lacquer thinner to get rid of the natural oils in the wood then the epoxy will work fine. the other way would be to screw the finish on but you would want to use an over sized or elongated hole so that you allow for any movement/ flex in the hull, use a finish grommet washer with your screw.

Peter
Reply With Quote Share with Facebook