Some mast attention required. Wrapstop was found to be loose and spinning on the forestay. Ordered new one from Profurl. Have decided to overhaul furling drum on main furler just so I know what I have. Brought both spinnakers (reacher and runner) to sail maker and decided to have a snuffer made for short handedness. A little pricey though at $13 per foot. Finished keel work and am installing a backup garmin GPS with XM radio and sat WX capabilty. This complements the somewhat antiquated RC520+ and RL70C radar sys already on boat. George is an ST6000+ and I have yet to check him although he's on the list. Cutlass bearing seems tight and wondering if anyone knows the procedure for bleeding the propshaft seal once back in the water. More later
Cheers and happy new Year
P.S. The Vendee globe has helped me get through this terrible MI WX
Last edited by migpilot; 01-07-2009 at 11:16 PM.