SailNet Community - View Single Post - replacing ports
Thread: replacing ports
View Single Post
  #3  
Old 07-08-2004
Onaugh Onaugh is offline
Junior Member
 
Join Date: Jun 2004
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
Onaugh is on a distinguished road
replacing ports

The ports are not symetrical at all. The forward port starts at a sharp point and rises at about a 30 degree angle from the bottom to a heigth of 5 5/8" then slowly increases to a heigth of 6 3/8".The overall length is 33 3/4".The aft port starts at 6 3/4" and slowly increases to 7 1/4" the tapers up at about 45 degrees from the bottom to a point at the top edge. Overall length of this port is 36 1/2". These are nonopening ports.Thanks
Reply With Quote Share with Facebook