SailNet Community - View Single Post - Anchor rode question
View Single Post
  #13 (permalink)  
Old 01-12-2009
sailingdog's Avatar
sailingdog sailingdog is offline
Telstar 28
 
Join Date: Mar 2006
Location: New England
Posts: 43,315
Rep Power: 10
sailingdog is just really nice sailingdog is just really nice sailingdog is just really nice sailingdog is just really nice sailingdog is just really nice
I'd go with 5/8 octoplait/brait and 5/16" G43 high-test chain. If you're not getting a windlass, get a good chain pawl for the foredeck, since it will make hauling up the 35' of chain, 33 lbs. of anchor and 30 lbs. of mud that the Rocna will pick up, much more manageable. I'm speaking from experience, since I have a Rocna 15 on my boat.

Less chain on the Fortress is probably a very good idea, as they don't recommend much more than 12-16' of chain to begin with, and more makes the anchor more difficult to set properly.

Be aware that for 5/8" line, you'll want at least 10" cleats.
__________________
Sailingdog

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Telstar 28
New England

You know what the first rule of sailing is? ...Love. You can learn all the math in the 'verse, but you take
a boat to the sea you don't love, she'll shake you off just as sure as the turning of the worlds. Love keeps
her going when she oughta fall down, tells you she's hurting 'fore she keens. Makes her a home.

—Cpt. Mal Reynolds, Serenity (edited)

If you're new to the Sailnet Forums... please read this
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
.

Still—DON'T READ THAT POST AGAIN.
Reply With Quote Share with Facebook
Sponsored Links