Originally Posted by ckgreenman
Nice. If you don't mind me asking, what did you use for the materials on those cushions. How comfortable are they for sitting/sleeping.
The seats (bottoms) and the birth are done with a 3/8 plywood base painted with polly sealer.
Padding is 4" foam from a water bed place covered all around with batting and covered with denim from Jo Anns.
The backs are the same but just 1" foam was used.
The material is just streched over the foam and stapled with stainless staples.
The plywood was placed with the natural bow up so that when streaching the fabric it pulled up the ends.
I don't sleep in the dinette but the seating is good.
The v-birth cushions were don the same way but with them running accross. Doing this got rid of the "sleeping in the crack" and also gave ez access to the storage area below. It also kept one side from sliding out.
Sleeps great, like on the couch.
To keep thing from sliding around a little velcro stapled to the backs works well and allows ez removal.