SailNet Community - View Single Post - Interior refit
Thread: Interior refit
View Single Post
  #6  
Old 02-06-2009
moxiesml moxiesml is offline
Junior Member
 
Join Date: Feb 2009
Location: Greensboro N.C.
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
moxiesml is on a distinguished road
We used Synergistecs 240 carpet adhesive[available at West Marine and various other boat suppliers] Its solvent free and low odor. It also is easier to work with than contact adhesive. It's applied with a notched trowel and allows some leaway in positioning [unlike contact adhesive] Removing the old contact adhesive was a nightmare which we didn't want to risk having to repeat. We had to carefully use a heat gun and scraper [to remove the major globs]and then sand.After 3 years the new hull liner is still holding firm.
Reply With Quote Share with Facebook