SailNet Community - View Single Post - Plumbing setup just doesn't seem right
View Single Post
  #2 (permalink)  
Old 02-28-2009
badsanta badsanta is offline
Senior Member
 
Join Date: Oct 2006
Location: Virginia
Posts: 704
Rep Power: 6
badsanta is on a distinguished road
The raw water intake to the head should not be next to the head Thu hull discharge. They should be on opposite sides of the boat to prevent pumping in the waste you are pumping out. From the Wye valve next to the bladder I would extend the discharge to a deck plate so you can pump out at a pump out station. Do you have room for a roto molded tank?
__________________
That derelict boat was another dream for somebody else, don't let it be your nightmare and a waste of your life.
Reply With Quote Share with Facebook