SailNet Community - View Single Post - hinge oem - anchor locker
View Single Post
  #2  
Old 10-24-2004
Jeff_H's Avatar
Jeff_H Jeff_H is offline
Moderator
 
Join Date: Feb 2000
Location: Annapolis, Md
Posts: 6,579
Thanks: 5
Thanked 95 Times in 71 Posts
Rep Power: 10
Jeff_H has a spectacular aura about Jeff_H has a spectacular aura about Jeff_H has a spectacular aura about
hinge oem - anchor locker

In the early 1980''s, I think that Oday used a lot of ''Tops-in-quality'' hardware.''Tops-in-quality'' is a Canadian company. You might try them. They also used Merriman which was in its death throws at that point. You should be able to find a set of hinges of the same physical dimension and then either fill the bolt holes in the boat with thickened epoxy and drill new holes or if the bolt locations are extremely different, (i.e. no overlap between the old and the new hole) then drill new holes in the hinge.

Jeff
Reply With Quote Share with Facebook