SailNet Community - View Single Post - Yanmar starting question
View Single Post
Old 04-18-2009
captbillc's Avatar
captbillc captbillc is offline
ancient mariner
Join Date: Jul 2008
Location: duluth ,minnesota
Posts: 434
Thanks: 1
Thanked 1 Time in 1 Post
Rep Power: 7
captbillc is on a distinguished road
on a racor filter without a priming pump on it , installing a ball valve on the inlet side of the racor makes bleeding the air easer. to change the filter element, close the valve, drain the racor, & change the filter. then fill the filter with fuel, open the valve & pump the engine pump to bleed the air out at the engine filter. i have a racor 500 . it does not have a priming pump on it. i have an electric pump between the tank & the racor which makes bleeding the system easy.
Liberals are people who care about others. Freethinkers are not constrained by the myths of religion.
Reply With Quote Share with Facebook