SailNet Community - View Single Post - Mast base organizer?
View Single Post
  #16  
Old 01-05-2005
DelmarRey's Avatar
DelmarRey DelmarRey is offline
Senior Member
 
Join Date: Aug 2001
Posts: 258
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 13
DelmarRey is on a distinguished road
Mast base organizer?

JCM,

I put mahogany risers under the organizers and clutches. Epoxied and fared in the corners with triangular strips with one side having a radius, sanded to a smooth radius and epoxied it all in, sanded again, filled any nicks with epoxy filler, sanded again and painted.

I raised the halyards up off the deck for two reasons! I don''t like that green stuff growing under the lines when not in use, a big problem here in the Pacific NW. And the organizers would have required some special geometry with the angle of the deck, the angle of the organizers combined with the exit height of the halfmoon blocks. Plus there''s less of an opportunity for the halyards to wear the deck paint.

The vessel is an old (79) Choate 40 IOR racer. The gelcoat has seen better days so paint is it''s outer coat now, making it easy to make modifications without worry.

Now, I just need to close in the cockpit and raise the winches. Then she''ll look like a Swan 40. Same hull design.
Reply With Quote Share with Facebook