Join Date: Mar 2006
Location: New England
Thanked 18 Times in 14 Posts
Rep Power: 15
Use thickened epoxy, not plain epoxy, a plain epoxy is awfully brittle. Drill the holes in the thickened epoxy and drive the screws in without coating them. If you coat them with epoxy, you probably won't ever be able to remove them.
BTW, the best dodger connection system is using a track and bolt rope IMHO. The studs are a PITA and don't hold the dodger in place uniformly.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
You know what the first rule of sailing is? ...Love. You can learn all the math in the 'verse, but you take
a boat to the sea you don't love, she'll shake you off just as sure as the turning of the worlds. Love keeps
her going when she oughta fall down, tells you she's hurting 'fore she keens. Makes her a home.
—Cpt. Mal Reynolds, Serenity (edited)
If you're new to the Sailnet Forums... please read this To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Still—DON'T READ THAT POST AGAIN.