Join Date: Nov 2006
Location: Jackson, Missouri
Thanked 1 Time in 1 Post
Rep Power: 10
Use a small propane torch and GENTLY heat the set screw and the area around it. Do not try to get it red-hot or even hot enough to discolor the stainless, just enough to get a bit of expansion/contraction movement between the hub and screw. Advice given above about patience is also very valuable.
Jboat J/37c (new to me Jan 2011); J/22 #1003
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.