SailNet Community - View Single Post - Wiring through pedestal guard
View Single Post
  #5  
Old 05-08-2009
chef2sail's Avatar
chef2sail chef2sail is offline
Senior Member
 
Join Date: Nov 2007
Location: Maryland
Posts: 6,974
Thanks: 29
Thanked 55 Times in 51 Posts
Rep Power: 7
chef2sail will become famous soon enough
Send a message via AIM to chef2sail
Yes I did solder the connectionsTry this link. Here is a picture of the final setup with the happy Admiral on our trip from Annapolis area to NYC last summer.. Chartplotter (C80)is in the lower Navpod Granprix and wind, autohelm, tridata and stero/ ipod remotes are in the 4 insert upper navpod. I had a machine shop drill the holes perfectly so they were centered ( they were hard to drill straight)for about 40 bucks. 2 (7/16)" holes were for the out wires and 8 small 3/16" holes for the navpod screws to hold them to the pedestal guard. The only wire you see is the one from my i pod which is in a cup holder to the remote on the navpod face

IMG_0437.jpg picture by chef2sail - Photobucket

IMG_0443.jpg picture by chef2sail - Photobucket

Dave
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
___________________________
S/V Haleakala (Hawaiian for" House of the Sun")
C&C 35 MKIII Hull # 76
Parkville, Maryland
(photos by Joe McCary)
Charter member of the Chesapeake Lion posse

Our blog-
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


“Sailing is just the bottom line, like adding up the score in bridge. My real interest is in the tremendous game of life.”- Dennis Conner

Last edited by chef2sail; 05-08-2009 at 09:05 PM.
Reply With Quote Share with Facebook