SailNet Community - View Single Post - DRS Sail?
Thread: DRS Sail?
View Single Post
  #5  
Old 05-14-2009
patrickrea's Avatar
patrickrea patrickrea is offline
Senior Member
 
Join Date: Aug 2007
Location: Toronto
Posts: 400
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 7
patrickrea is on a distinguished road
Basically it behaves like a really big light genoa. A regular spinnaker has both side edges identical, uses a pole to get the sail outboard and is attached only at the top and then has sheets and guys to control the rotation of the sail around the front of the boat and to trim the sail. A symmetrical spinnaker requires constant trimming to maintain shape and is efficient from a beam reach down to a dead run.

A DRS or assymetrical has a short side between the head and what becomes the tack. A sheet to control sail trim is attached to the clew and the tack is attached by a strop or short line to a bow fitting. It trims like a genoa and doesn't need a lot of tweaking to get good results which is why it is popular with cruisers.It is very efficient from a close reach down to just below a beam reach.
__________________
Patrick Rea

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

1978 30' Hughes Northstar 1000
1964 20' Bertram Moppie
Reply With Quote Share with Facebook