SailNet Community - View Single Post - Anchor roller
Thread: Anchor roller
View Single Post
post #6 of Old 06-08-2009
Junior Member
Join Date: Aug 2007
Location: BC's Sunshine Coast
Posts: 27
Thanks: 2
Thanked 0 Times in 0 Posts
Rep Power: 0
Send a message via Skype™ to doctorcam
Advice on anchor roller design

I'm in the same situation: I have an Albin 7.9, with roller furling installed right at the point of the bow. There's no room underneath, and very little to either side (a little more than enough to run the chain through). I've though about fastening a wooden platform to the foredeck, installing bollards to control the movement of the chain and rode, and mounting a conventional roller, but wood rots, and there's little surface area to fasten the platform to. An alternative is to have one built out of stainless. Yet another is to mount one to one side or the other, but aft of the furler, which would mean having the anchor stick out some distance to the side - that doesn't seem very safe. I wouldn't mind seeing some other ways of dealing with this.

Albin 7.9 "Catharsis" - moored in Whiskey Slough, Pender Harbour
doctorcam is offline  
Quote Share with Facebook
For the best viewing experience please update your browser to Google Chrome