I put fuses in between the panels and the MPPT controller so that if I have to take an individual panel off line, I can. Also, I'm using a fuse block to connect the individual panels to the MPPT controller input. This allows me to add or remove panels as needed fairly easily without disturbing the MPPT setup otherwise.
Quote:
Originally Posted by erps
|
__________________
Sailingdog
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Telstar 28
New England
You know what the first rule of sailing is? ...Love. You can learn all the math in the 'verse, but you take
a boat to the sea you don't love, she'll shake you off just as sure as the turning of the worlds. Love keeps
her going when she oughta fall down, tells you she's hurting 'fore she keens. Makes her a home.
—Cpt. Mal Reynolds, Serenity (edited)
If you're new to the Sailnet Forums... please read this
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts..
Still—DON'T READ THAT POST AGAIN.