SailNet Community - View Single Post - Spinnaker Handling: 180 Turn - beam reach to beam reach?
View Single Post
  #5  
Old 06-12-2009
Hudsonian Hudsonian is offline
Senior Member
 
Join Date: Apr 2008
Posts: 440
Thanks: 12
Thanked 13 Times in 13 Posts
Rep Power: 7
Hudsonian is on a distinguished road
Arrange the jib along starboard rail making sure that the port jib sheet goes over the spinnaker pole and lift bridle forward of the pole lift; set the jib; drop the chute to leeward (probably under the foot of the jib and into the forward hatch leaving the sheet, guy, and halyard attached); drop the pole to the deck leaving the pole lift and down haul attached; take the slack in the pole lift aft and tie it to the base of the mast; harden up; tack; bear off; snap the new guy into the forward end of the pole; untie the pole lift from the base of the mast; raise the pole to the proper position; open the forward hatch; cheat the tack forward to pole; and hoist the spinnaker.
Reply With Quote Share with Facebook