I would recommend either epoxying a conduit to the overhead, above the head liner or using WeldMount fittings. The WeldMount system uses a methacrylate adhesive that cures relatively quickly. BTW, you can use five-minute epoxy for non-structural, interior uses, like this one...
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
You know what the first rule of sailing is? ...Love. You can learn all the math in the 'verse, but you take
a boat to the sea you don't love, she'll shake you off just as sure as the turning of the worlds. Love keeps
her going when she oughta fall down, tells you she's hurting 'fore she keens. Makes her a home.
—Cpt. Mal Reynolds, Serenity (edited)
If you're new to the Sailnet Forums... please read this To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Still—DON'T READ THAT POST AGAIN.