The reason for conduit is primarily to make running future wires and doing maintenance simpler. It also allows one to install insulation above the overhead in a boat.
Does he really need a conduit for 12VDC marine cable? I found some very small wire tie mounting points at West Marine. I used adhesive (sometimes 5200, sometimes 4200 depending upon where) to mount these, then wire tie the cable to them. I also use them to mount conduit, but if there is no room for conduit, I just mount the wires directly.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
You know what the first rule of sailing is? ...Love. You can learn all the math in the 'verse, but you take
a boat to the sea you don't love, she'll shake you off just as sure as the turning of the worlds. Love keeps
her going when she oughta fall down, tells you she's hurting 'fore she keens. Makes her a home.
—Cpt. Mal Reynolds, Serenity (edited)
If you're new to the Sailnet Forums... please read this To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Still—DON'T READ THAT POST AGAIN.