If the fiberglass is that thin, it won't support its own weight... How big are these holes??? I seriously doubt the fiberglass is less than an 1/8" thick at a minimum.
Thanks for all the tips! One thing I am concerned about that i did not mention, the fiberglass in the cockpit is very thin, probably no thicker then the gel coat. Your picture made me think about that. The epoxy won't fill a deep hole with sides, its a hole that is much wider than it is deep. How does that impact it?
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
You know what the first rule of sailing is? ...Love. You can learn all the math in the 'verse, but you take
a boat to the sea you don't love, she'll shake you off just as sure as the turning of the worlds. Love keeps
her going when she oughta fall down, tells you she's hurting 'fore she keens. Makes her a home.
—Cpt. Mal Reynolds, Serenity (edited)
If you're new to the Sailnet Forums... please read this To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Still—DON'T READ THAT POST AGAIN.