SailNet Community - View Single Post - CS36T Cap Shroud
View Single Post
  #1  
Old 06-26-2009
JohnMaschek JohnMaschek is offline
Junior Member
 
Join Date: Aug 2008
Location: Dallas, Tx
Posts: 24
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
JohnMaschek is on a distinguished road
CS36T Cap Shroud

I have been working on my new 1982 CS36T for several months and finally got a chance to put some load on the sails and rigging this last weekend.
I have a new 150 genoa and main sail from North. We were really going fine to weather in 15-18 knts with the rail in the water. GPS said we hit 6.8knts. I was looking up in the rigging and noticed the port cap shroud had come off the the top spreader. Not a good feeling.
We managed to take load off the rig without noticable damage to the mast. It was bent a little to starboard above the top spreader but we loosened the other shrouds and back stay and it appears to be more or less straight.
I have not been able to get up the mast to investigate, but it appears from the deck that there is a groove and a retainer in the spreader. Don't know how it came off.
Anyone know how the shrouds are connected to the spreaders?
Any comments and suggestions would be greatly appreciated.

John Maschek
s/v Some of its Magic
Reply With Quote Share with Facebook