SailNet Community - View Single Post - USYacht project
Thread: USYacht project
View Single Post
  #9  
Old 07-09-2009
US27inKS's Avatar
US27inKS US27inKS is offline
Midwest Puddle Pirate
 
Join Date: Feb 2005
Location: Gardner, KS
Posts: 2,160
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 11
US27inKS has a spectacular aura about US27inKS has a spectacular aura about
There really are no parts suppliers for USY. Bayliner disowned anything to do with sailboats many years ago. All you can do is cut it apart, and make new pieces to match. Most of the spars and rigging for these boats came from Kenyon. There are very few sources for Kenyon parts, but standard harken and lewmar will work with very little modification.

When I replaced the floor, I bought marine plywood and epoxy from Noah's marine supply. Good prices and reasonable shipping. If you have a local source, use it, if not call Noah's.

To cut the tabbing for the furniture, I used an air die grinder with a rotozip DC1 bit.

Have fun.
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
John USYacht 27 "Cora Lee"
Reply With Quote Share with Facebook