SailNet Community - View Single Post - Thru Hull Hole Sizing
View Single Post
  #1  
Old 07-10-2009
cas8100 cas8100 is offline
Member
 
Join Date: Apr 2008
Location: Wisconsin
Posts: 51
Thanks: 1
Thanked 0 Times in 0 Posts
Rep Power: 7
cas8100 is on a distinguished road
Thru Hull Hole Sizing

I'm installing a new 3/4" ID thru hull (forespar marelon). The actual hole sizing required is at least 1 1/16". Should I oversize the hole (i.e. 1 1/8 or 1 1/4) so that there's plenty of room for sealant or size it as accurately as possible. Any Thoughts?

Thanks
Reply With Quote Share with Facebook