SailNet Community - View Single Post - Pumping out a flat bilge
View Single Post
  #4  
Old 07-10-2005
boatbum boatbum is offline
Member
 
Join Date: Jun 2004
Posts: 59
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 11
boatbum is on a distinguished road
Pumping out a flat bilge

There are switches with two probes that will function in very little water, but the typical Rule pump itself has about a 3/4" threshold to be able to move water and depending on the hose size, some water runs back down the hose after the pump cycles. If you use a Par remote pump and flat strainer pick-up in combination with the probe type switch, you will get most of the water out.
Reply With Quote Share with Facebook