SailNet Community - View Single Post - Belaying pins
Thread: Belaying pins
View Single Post
  #6  
Old 09-15-2009
adamowens adamowens is offline
Member
 
Join Date: Apr 2005
Posts: 58
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 10
adamowens is on a distinguished road
Bill,
I drilled 1/2 inch holes while the hadles were still in the lathe. The pins are 1/2 inch stainless round bar epoxied about 1 1/2 inches deep in the handle.

Adam Owens
PSC 31 Journey
Reply With Quote Share with Facebook