Welcome to Sailnet
An existing genoa will need recutting and a luff rope added (if it's currently a hanked-on sail) for use on a furler. The recut is to allow for the height of the furling drum above the deck... necessarily shortens the luff length of the sail.
This will likely run you $200-300 so you may want to consider if the sail is good enough to make it worth spending that much on it, or whether you want to put that money toward a properly designed sail for that setup.
1984 Fast/Nicholson 345 "FastForward"
".. there is much you could do at sea with common sense.. and very little you could do without it.."
Capt G E Ericson (from "The Cruel Sea" by Nicholas Monsarrat)