SailNet Community - View Single Post - Help with installing a tiller pilot
View Single Post
  #4  
Old 09-29-2009
captbillc's Avatar
captbillc captbillc is offline
ancient mariner
 
Join Date: Jul 2008
Location: duluth ,minnesota
Posts: 418
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 6
captbillc is on a distinguished road
my navco tiller pilot is mounted with the pin in the bottom of the unit inserted in a sleeve on the top of the coaming. the shaft end snaps on to a rounded pin in the top of the tiller. the tiller pilot is horizontal. the 1 1/2" SS rudder shaft is high enough so this works very well.
__________________
Liberals are people who care about others. Freethinkers are not constrained by the myths of religion.
Reply With Quote Share with Facebook