SailNet Community - View Single Post - Holly grail for new teak!
View Single Post
Old 10-14-2009
JohnRPollard's Avatar
JohnRPollard JohnRPollard is offline
Join Date: Mar 2007
Location: Chesapeake
Posts: 5,680
Thanks: 0
Thanked 3 Times in 3 Posts
Rep Power: 10
JohnRPollard is a jewel in the rough JohnRPollard is a jewel in the rough JohnRPollard is a jewel in the rough
Are you talking about interior or exterior teak, or both?

Personally, I would not coat teak with epoxy. Clear (i.e. unthickened) epoxy is used as an impermeable sealant, to protect wood from water damage. Teak doesn't need protection from water -- it is already virtually impervious to rot because of its natural oils.

Also, the epoxy will need to be protected from uv damage at all times. If you ever miss a re-varnish cycle and the epoxy suffers uv damage, you will have a real mess stripping it all off.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Pacific Seacraft Crealock 31 #62

Reply With Quote Share with Facebook