SailNet Community - View Single Post - Bristol 27 project boat
View Single Post
post #13 of Old 10-14-2009 Thread Starter
Junior Member
tugboatdon's Avatar
Join Date: Oct 2009
Posts: 13
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
I posted somemore pictures on Photobucket. I have my work cut out for me. I intend to install a holding tank onboard while she is ripped apart. I am thinking of putting it on the starboard side under the hull side seat. The tank will be 20-25 gallon with a Jabsco manual toilet attached. I have one question, if anybody can answer it. The previous owner drill a 3" hole in the portside deck area next to the cabin truck. All I saw were two fiberglass layers and no core material. Is there some sort of core between the outside and inside layers on a 1966 Bristol 27. The deck area in question feels a bit soft. I have to do some repair work on the starboard side where life line stantion baseplate tore the deck around it. As I said in my first post any help would be greatly appreciated.

Last edited by tugboatdon; 10-14-2009 at 08:55 AM. Reason:
tugboatdon is offline  
Quote Share with Facebook
For the best viewing experience please update your browser to Google Chrome