SailNet Community - View Single Post - Holly grail for new teak!
View Single Post
  #7  
Old 10-14-2009
T37Chef's Avatar
T37Chef T37Chef is offline
Senior Member
 
Join Date: Oct 2006
Posts: 4,165
Thanks: 65
Thanked 28 Times in 26 Posts
Rep Power: 8
T37Chef will become famous soon enough
Quote:
Originally Posted by Brucerobs2 View Post
Not sure if this is the "holy grail" but since your teak is already perfect, you might consider adding about 4 coats of either Cetol Gloss (preferred), and/or Cetol Natural Teak (2nd choice)
Last time I read the can from Cetol...I said specifically not to use the clear coat by itself, start with 3-4 layers of Natural, Light, or Original, followed by 2-3 coats of gloss, which then becomes your maintenance coat.

I am a big fan of Cetol, especially the new Natural followed by the Gloss, but not for high traffic areas or areas where you will see it up close regularly.

I have been using Epifanes Woodfinish Gloss followed by their Extra UV Clear Varnish with great results, but I also keep those teak items covered (wheel, cockpit table, etc.).

More importantly, you say you want to use it on the exterior "floor"? If you mean your teak deck or cockpit floor I would do nothing to it!!!! Unless you like falling on your ass regularly.

Last edited by T37Chef; 10-14-2009 at 07:41 PM.
Reply With Quote Share with Facebook