Well
A 25mm shaft is .984 So the real issue is the angle of taper they CUT were the prop mounted which in all likelyhood is going to be different than and inch shaft and result in a bad fit if you cant find a metric prop
If you look around a BIT you will find the standard tapers are a LOT different
__________________
1970 Cal 29 Sea Fever
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
1981 J24 Tangent 2930
Tommays
Northport NY
If a dirty bottom slows you down what do you think it does to your boat
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Last edited by tommays; 11-30-2009 at 10:38 AM.
|