SailNet Community - View Single Post - Resheaving Main Halyard
View Single Post
  #7  
Old 07-16-2001
scottcallahan scottcallahan is offline
Junior Member
 
Join Date: May 2001
Posts: 15
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
scottcallahan is on a distinguished road
Resheaving Main Halyard

i would use hi test twine and put a teardrop sinker on the end and just toss the sinker over the shiv let it drop down the mast. tie the sheet to the end WITHOUT the sinker on it . then tape up the joint so that it does not snag. then fish out the weight from the bottom and start pulling slowly and gently.
Reply With Quote Share with Facebook