SailNet Community - View Single Post - Impeller replaced, but did I screw up?
View Single Post
  #10  
Old 02-24-2010
sailingdog's Avatar
sailingdog sailingdog is offline
Telstar 28
 
Join Date: Mar 2006
Location: New England
Posts: 43,291
Thanks: 0
Thanked 8 Times in 8 Posts
Rep Power: 13
sailingdog is just really nice sailingdog is just really nice sailingdog is just really nice sailingdog is just really nice sailingdog is just really nice
The lack of grease shouldn't be an issue as long as you've got water flowing into the system. The missing blades are likely stuck in the heat exchanger, and if you haven't taken that apart and cleaned it out, it is probably past due for it. It'll probably have bits of old zincs too. Speaking of zincs, have you replaced the zincs in the engine?
__________________
Sailingdog

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Telstar 28
New England

You know what the first rule of sailing is? ...Love. You can learn all the math in the 'verse, but you take
a boat to the sea you don't love, she'll shake you off just as sure as the turning of the worlds. Love keeps
her going when she oughta fall down, tells you she's hurting 'fore she keens. Makes her a home.

—Cpt. Mal Reynolds, Serenity (edited)

If you're new to the Sailnet Forums... please read this
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
.

Still—DON'T READ THAT POST AGAIN.
Reply With Quote Share with Facebook