When I suggested Krytox, I wasn't aware that the parts in question were in an oil bath.
I wouldn't have suggesting using Krytox in that situation.
Originally Posted by hellosailor
I'm a Krytox fan, but if those parts are in the oil bath, wouldn't that be a waste? Better to stick with greases and oils that use the same base (petroleum or otherwise) if they're going to contact each other.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
You know what the first rule of sailing is? ...Love. You can learn all the math in the 'verse, but you take
a boat to the sea you don't love, she'll shake you off just as sure as the turning of the worlds. Love keeps
her going when she oughta fall down, tells you she's hurting 'fore she keens. Makes her a home.
—Cpt. Mal Reynolds, Serenity (edited)
If you're new to the Sailnet Forums... please read this To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Still—DON'T READ THAT POST AGAIN.