Join Date: Mar 2006
Location: New England
Thanked 18 Times in 14 Posts
Rep Power: 16
Using something like TefGel or LanoCote is probably better than using a silicone sealant. If the pieces are larger, say, like the base of a mounting plate or line clutch, you can use the thin plastic from the side of a translucent milk jug as a galvanic isolation washer, in conjunction with the LanoCote or TefGel.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
You know what the first rule of sailing is? ...Love. You can learn all the math in the 'verse, but you take
a boat to the sea you don't love, she'll shake you off just as sure as the turning of the worlds. Love keeps
her going when she oughta fall down, tells you she's hurting 'fore she keens. Makes her a home.
—Cpt. Mal Reynolds, Serenity (edited)
If you're new to the Sailnet Forums... please read this To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Still—DON'T READ THAT POST AGAIN.