The panel allows you to have THREE independent circuits, so that you can selectively pick what you want powered up.
It also gives you breakers that are sized more for the wiring loads that you'll have on each independent circuit. The double ganged breakers are 30 amp breakers, cause that is what the normal shorepower feed is. The lower three independent breakers are usually 15 amps breakers...
Cool. Thanks Dog.
So I understand a bit more, what does the panel provide over the layout in the original diagram (breaker only)?
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
You know what the first rule of sailing is? ...Love. You can learn all the math in the 'verse, but you take
a boat to the sea you don't love, she'll shake you off just as sure as the turning of the worlds. Love keeps
her going when she oughta fall down, tells you she's hurting 'fore she keens. Makes her a home.
—Cpt. Mal Reynolds, Serenity (edited)
If you're new to the Sailnet Forums... please read this To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Still—DON'T READ THAT POST AGAIN.