SailNet Community - View Single Post - Help Identify part on C-22 Mast please
View Single Post
  #7  
Old 04-12-2010
donlofland donlofland is offline
Senior Member
 
Join Date: Dec 2008
Posts: 114
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 6
donlofland is on a distinguished road
That old black plastic part unfastens from the woodien part by undoing the screws. Then the new anchor light screws back on to the wood part. The new anchor light will have wires that go down the aluminum tube and fasten to the wiring inside the mast. Anchor the wires inside the top of the mast mast to something there so the weight of the wires isn't supported only by the wire connectors. (When I did this on my 27', I had the masthead fitting off, and this might have made the job a bit easier...)
Reply With Quote Share with Facebook