SailNet Community - View Single Post - Indentifying Mystery Hardware (Mystery to me anyway) :)
View Single Post
  #4  
Old 04-19-2010
CalebD's Avatar
CalebD CalebD is offline
Tartan 27' owner
 
Join Date: Jan 2008
Location: NYC
Posts: 4,548
Thanks: 4
Thanked 87 Times in 80 Posts
Rep Power: 7
CalebD will become famous soon enough
C - yes, attachment point for spinnaker pole. You must have a topping lift for holding the spin pole up?
A,B - these could be meant for running a 'down guy' to the spinnaker pole which would keep it from moving higher then the topping lift setting. One for either side.
G - could be your holding tank vent. I normally see the holding tank vent mounted outboard, high on the free board. If that is the holding tank vent this location may allow you to sniff the gases of the tank while sitting in the cockpit. With the vent mounted on the side of the boat you may not smell anything. If it is the vent make sure that fitting is clear.
__________________
"The cure for anything is salt water~ sweat, tears, or the sea." ~Isak Denesen

Everybody has one:

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote Share with Facebook