SailNet Community - View Single Post - Cal 20 mast support question
View Single Post
  #2  
Old 06-11-2010
dealweb dealweb is offline
Junior Member
 
Join Date: Apr 2007
Posts: 23
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
dealweb is on a distinguished road
I happen to be redoing my deck core at the moment so I can answer on how this was done for my '68 Cal. The support beam was not glued in at all. It has two braces which were just screwed in. The mast plate was through bolted to the support beam and the middle shrouds were also bolted. The beam was tabbed using fiberglass on the ends. Let me know if you need any pics of specific areas of the Cal also and I can take those for you.
Reply With Quote Share with Facebook